Berkey PF-2 Fluoride and Arsenic Filters Set of 2

Berkey

$50.00
We are an authorized stocking dealer, so your Berkey order will actually ship the same or next day for FREE.  Check out our ratings and you will see that our both our shipping times and customer service scores cannot be beaten. Our only goals are to put a smile on your face, by shipping your New Berkey quickly.  

 

*The PF-2™ Fluoride and Arsenic Reduction Filters are made and assembled in the USA

  • The Berkey PF-2™ Fluoride and Arsenic Reduction Elements adsorb the following unwanted elements found in drinking water:
    • Fluoride: Sodium Fluoride, Sodium Fluorosilicate, Fluorosilicic Acid (aka Hydrofluorosilic Acid)
    • Arsenic: V and pre-oxidized Arsenic III
    • Other residual heavy metal ions
  • Made from safe, non-leaching Polypropolene #5 that is BPA-free
  • Sold in a set of 2
  • Berkey PF-2™ Fluoride and Arsenic Reduction Elements are designed to be used in conjunction with the Black Berkey® Purification Elements only 
  • Attach to the bottom of the Black Berkey® Purification Elements and sit in the lower chamber of the Berkey unit
  • Number of Berkey PF-2™ Elements in the bottom chamber must match the number of Black Berkey® Purification Elements in the top chamber; for example, 4 Black Berkey® Purification Elements would require 4 PF-2 Filters
  • Set of 2 Berkey PF-2™ Elements need replacement after 1000 gallons of use
  • The Berkey PF-2™ Fluoride and Arsenic Reduction Elements are covered under a six month warranty

The PF-2 is for use with Black Berkey Purifiers - If you use ceramic filters, you will need the PF-4 *** PF-2 reduction elements are designed for use in conjunction with Black Berkey water purification elements to adsorb the following unwanted elements found in drinking water. Fluoride, Arsenic V and pre-oxidized Arsenic III, Other residual heavy metal ions. FLUORIDE: Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm per cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (99.75% reduction). ARSENIC: This product uniquely targets the entire family of arsenic oxide anions as well as the arsenic cations. REPLACEMENT: Under normal conditions it is recommended that each set of two PF-2 elements be replaced after 1,000 gallons.

Regular price $50.00
We are an authorized stocking dealer, so your Berkey order will actually ship the same or next day for FREE.  Check out our ratings and you will see that our both our shipping times and customer service scores cannot be beaten. Our only goals are to put a smile on your face, by shipping your New Berkey quickly.  

 

*The PF-2™ Fluoride and Arsenic Reduction Filters are made and assembled in the USA

  • The Berkey PF-2™ Fluoride and Arsenic Reduction Elements adsorb the following unwanted elements found in drinking water:
    • Fluoride: Sodium Fluoride, Sodium Fluorosilicate, Fluorosilicic Acid (aka Hydrofluorosilic Acid)
    • Arsenic: V and pre-oxidized Arsenic III
    • Other residual heavy metal ions
  • Made from safe, non-leaching Polypropolene #5 that is BPA-free
  • Sold in a set of 2
  • Berkey PF-2™ Fluoride and Arsenic Reduction Elements are designed to be used in conjunction with the Black Berkey® Purification Elements only 
  • Attach to the bottom of the Black Berkey® Purification Elements and sit in the lower chamber of the Berkey unit
  • Number of Berkey PF-2™ Elements in the bottom chamber must match the number of Black Berkey® Purification Elements in the top chamber; for example, 4 Black Berkey® Purification Elements would require 4 PF-2 Filters
  • Set of 2 Berkey PF-2™ Elements need replacement after 1000 gallons of use
  • The Berkey PF-2™ Fluoride and Arsenic Reduction Elements are covered under a six month warranty

The PF-2 is for use with Black Berkey Purifiers - If you use ceramic filters, you will need the PF-4 *** PF-2 reduction elements are designed for use in conjunction with Black Berkey water purification elements to adsorb the following unwanted elements found in drinking water. Fluoride, Arsenic V and pre-oxidized Arsenic III, Other residual heavy metal ions. FLUORIDE: Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm per cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (99.75% reduction). ARSENIC: This product uniquely targets the entire family of arsenic oxide anions as well as the arsenic cations. REPLACEMENT: Under normal conditions it is recommended that each set of two PF-2 elements be replaced after 1,000 gallons.